Wireless Tattoo Machine Large Color Screen Digital Display New Permanent Makeup Tattoo Machine with 1500MAH Power Tattoo Gun

Product Parameters:

Product Name: Black Warrior Tattoo Machine

Motor：Customized Coreless Motor

Motor Speed：12V/12000RPM

Stroke：4.0mm

Voltage：4-12V

Battery Capacity：1500mAh

Battery Life：5-6Hours

Charging interface: Type-C

Battery Start Modes：Jump Start / Stable Start

Dual Working Mode：Normal mode / Dot mode

Size：40*110mm

Weight：198g

Operating Instructions:

1. Long press “Power button” to turn on/off the machine.

2. Click “Power button” to turn on/off the motor. (Blue V: open; Grey V: closed;)

3. Double click “Power button” to reset the working timer.

4. Click “M button” to select the memory gear value, NPS value, and HZ value in sequence.

5. Double “M button” to enable/disable the strong start function.

6. Long press “M button” to switch between prick mode/regular voltage mode.

7. Short press “+ button” to slowly increase the adjustment voltage value/memory gear value/NPS value/HZ value.

8. Long press “+ button” to quickly increase the adjustment voltage value/memory gear value/NPS value/HZ value.

9. Short press “- button” to slowly increase the adjustment voltage value/memory gear value/NPS value/HZ value.

10. Long press “- button” to quickly increase the adjustment voltage value/memory gear value/NPS value/HZ value.

Function Description:

1. Without any operation, the screen brightness will decrease after 10 seconds to reduce energy consumption and interference during the working process.

2. The motor is not turned on, and the machine will automatically shut down after 5 minutes to reduce battery energy consumption.

3. The percentage value flashes when the battery level is below 10%, the motor stops working when the battery level is below 3%, and there is a low battery warning.

4. During the operation of the motor, if a high current fault occurs, the motor will automatically stop working and prompt a locked rotor fault code.

5. During the operation of the motor, if a short circuit fault occurs, the motor will automatically stop working and prompt a short circuit fault code.

6. At any time when the charger is connected, the battery enters the charging state directly, the charging symbol is displayed on the screen, and the motor is prohibited from working to ensure charging safety.